1-888-962-6554
www.YERFDOG.Com
18
SUGGESTED DECAL PLACEMENT
Figure 20
Figure 21
Apply Decal kit (04005) as shown in
illustrations.
NOTE: Decal kit may be slightly different
than the one shown here.
BEFORE APPLICATION:
1) Wipe surface with a clean cloth.
Make sure surface is dry and free of
dirt and dust.
2) Layout decal spacing by placing
decals in approximate locations.
TO APPLY DECALS:
1) Peel from center of the backing to
expose adhesive surface.
NOTE: Do
Not
remove decal backing
completely. This will cause decal to
curl and stick to itself.
2) Align the decal with floor pan.
Gently press adhesive to floor pan to
start application.
3) Slowly peel backing from underside
of decal, gently pressing out any air
bubbles. Continue until the decal is
completely adhered to the floor pan.
4) Use a cotton rag working in circular
motion until air bubbles are removed.
5) Attach other decals as shown.
FLOOR DECALS
SIDE DECALS
1 PER SIDE
FRONT PAN DECAL