SOLAR TIME
The main center segments shows the ratio of day and night, times for sunrise and sunset, and they relate to the
24-hour dial. Each solar segment represents 15 minutes.
LUNAR TIME
The smaller circle in the bottom half of the LCD indicates the lunar phase. Each moon phase segment represents
about 44 hours.
The outer LCD ring shows the ratio for moon up and moon down, times for moonrise and moonset, and they
relate to the 24-hour dial. Each lunar segment represents 15 minutes.
All rotating bezels represent a 24-hour dial with
an equinox day and night display.
The duo finish on the thin ring inside the bezel
divide the AM/PM hours.
When setting the sunstone halfway between sunrise and sunset, it indicates time for solar high noon.
Depending on which watch model you have,
one of the following three bezel descriptions applies.
24 HOUR BEZEL
The 24-hour bezel is best used to keep time for a second time zone or location at a glance. Rotate the bezel until
hand points to time for the desired time zone. This bezel is accompanied with an AM/PM inner dial.
SYMBOL BEZEL
The symbols coordinate to a 24-hour dial and can be used to keep time for a second time zone or location at a
glance. The symbols can also be used as a code for daily personal events. You choose the meaning. This bezel is
accompanied with a 24-hour inner dial.
SOLUNAR BEZEL
The solunar bezel can be used to track the daily rise and set of the sun or the moon. This bezel is accompanied
with a 24-hour inner dial.
SOLSTICE & EQUINOX DATES
On solstice and equinox dates the center LCD center segments will turn into a sun display. Every 30 minutes the
event name will display for 30 seconds and flash a thin ray sun display. To show regular time display push and
hold S for 2 seconds.
Summary of Contents for Zulu series
Page 2: ......
