Controls And Settings
1. Function / Voltage Adjustment / Gas Checking Knob: Permits selecting Gas Pre-Flow, Post-Flow, Inductance, Rin, Hot start, Burn
back time, Spot time in MIG and Pulsed MIG Mode, Synergy or Manual MIG in MIG Mode, Pulse / Double-Pulse Pulsed MIG
Mode, IBS, FRQ, Duty cycle in Double-Pulse MIG Mode, Arc force, Hot start, VRD, and Anti-stick in Stick Mode. Permits select-
ing output voltage (fine-adjusting voltage in synergic mode).
Press the button, the gas checking function will be on.
2. Value Adjustment / WFS Knob: Permits selecting output current, output Voltage , wire feeding speed (manual MIG mode), on/off
for double pulse, on/off for synergic MIG, choosing different values for weld specifications.
Press and hold the button for three seconds or more will turn on the wire-feed-inchingfunction and feed the wire through the gun
as sembly.
3. Process Selection Button: Allows the user to toggle between processes MIG/MAG (GMAW) / Pulsed MIG / STICK(SMAW) / Lift
TIG (GTAW).
4. 2T/4T/4TU Spot Torch Operation Selector Button.
5. Wire Diameter Selector Button: .023"/.030"/.035"/.045".
6. Menu Button: Press to toggle between Pulse and Double Pulse; Enter Welding Spec for specific settings such as Gas Pre-flow
and Post-flow, Inductance, Rin, hot start current, burn back time, spot time DIG (Arc force), hot start, anti-stick; Enter Pulse Spec
such as IBS, FRQ (frequency), or duty cycle.
7. Material Selector: Al-Si / Al-Mg / SS / Fe Mix / Fe Co
2
8. Setting Saving and Loading Button.
9. Color LED Screen: Display the details of a welding procedure such as welding material, process mode, wire diameter, output volt-
age, output current, wire feeding speed current, and other welding parameters.
- 8 -
20
200
MENU
AlSi
.023"
0.6mm
.030"
0.8mm
.035"
0.9mm
.045"
1.2mm
Arclong
m/min
AlMg
Ss
2
1
7
6
5
4
3
8
9
Summary of Contents for YWM-211P
Page 2: ......
Page 38: ...WIRING DIAGRAM 34...
Page 39: ......
Page 40: ...WE ALWAYS STAND BEHIND IT Toll Free 855 937 4567 www yeswelder com...
