8.
9.
a 29’r that embodies the
soul of a ClassiC yeti
trailbike. built with
our switCh teChnology.
1.
the sB95 delivers 5 inches of travel with our new switch
technology. efficient pedaling performance while still smooth and
continuous when the going gets rough.
2.
Compact, stiff, and fully sealed, the eccentric assembly is the key
component to switch technology and is virtually maintenance free.
3.
Oversized pivot pins help create a stiff interface between the front
and rear triangles of the frame. enduro max sealed bearings keep
things moving freely at the pivots.
4.
the splined BB shell can accept a removable isCG 03’ or 05’ tab.
the splined system is lighter than a conventional welded tab and
allows for a myriad of chain-guide options.
5.
Using our new inset headtube on the sB95 allows for a larger
headtube with more welding area, increased stiffness, and lower
overall ride height.
6.
the sB95 uses a 2.0 inch stroke, 7.5 inch eye to eye shock, by Fox
racing shox.
7.
the yeti chip system allows for an easy switch between a standard
135mm Qr or the142mm x 12mm shimano thru-axle system.
8.
Custom chain-slap guards on the seatstay and chainstay keep
things quiet while riding and protect the frame.
9.
Dedicated cable stops for a height adjustable seat post make
routing the line clean and easy. enhance your trail riding experience
on the sB95 with a dropper post.
10. mount a direct mount (e-type) front derailleur to the sB95 with
ease.
1.
patent penDinG sUspensiOn system
2.
FUlly sealeD eCCentriC system
3.
OversizeD pivOt pins with enDUrO max BearinGs
4.
splineD BB shell aCCepts remOvaBle isCG 03/05 taBs
5.
tapereD inset heaDtUBe (44mm/56mm)
6.
rear shOCk By FOx raCinG shOx
7.
DrOpOUts 12mm x 142 thrU axle Or 135mm Qr
8.
CUstOm Chain-slap GUarDs
9.
CaBle stOps FOr heiGht aDjUstaBle seatpOst
10. DireCt mOUnt FrOnt DerailleUr
