Unit 1 Westfield Court | Barns Ground | Clevedon | Bristol | BS21 6FQ | UK
Tel No: +44 1275 217060 | Email: support@yetitool.com
SMARTBENCH V1.1
11
Fit the
Amphenol Cable
The Amphenol connector connects to the socket
on the underside of the
X Beam Lower.
Plug the cable into the connector and rotate the
cuff clockwise to secure.
Fit the E
xtractor
SmartBench has a dedicated power outlet for extractors, to enable auto-extraction, but
the extractor must not draw more than 10 amps. If the extractor draws more than 10
amps, the extractor must be powered from a separate power outlet and operated
manually.
Attach the extraction hose to the underside of the
X Beam Lower
Either: plug in your extractor to a separate power
outlet…
1
2
1
2
Summary of Contents for SMARTBENCH V1.1
Page 1: ...Quick Start Guide...