6. Operating
Operating the device
from
control panel
Device on/off button
Settings button
Right chamber temperature reduction button
Left ventricular lowering button
Right chamber temperature increase button
Current temperature inside the right chamber
Current temperature insdie the left ventricle
Left ventricular temperature increase button
Left ventricular display
Right ventricular display
USB port for charging external devices
such as smartphone/tablet
Temperature
scale °C/°F
Battery protection mode (H/M/L)
The Voltage
at the current reaching
the device
Battery protection mode
Switch-off voltage with 12V supply
Restart voltage with 12V power supply
Switch-off voltage with 24V supply
Restart voltage with 24V supply
Low (L)
9.6V
10.9V
21.3V
22.7V
Medium (M)
10.1V
11.4V
22.3V
23.7V
High (H)
11.1V
12.4V
24.3V
25.7V
Cooling mode
( Max/Eco)
Device on / off button
Button
Function
Pressing once will turn on/off the device
Buttons responsible for setting the temperature inside the device
.
A single press increases the temperature
A single press lowers temperature
Pressing it once will change the cooling mode from ECO (energy saving) to MAX (fast cooling).
Default setting for fast cooling (MAX)
Press and hold to change between battery protection modes (when powered from a 12 / 24V socket in
motor vehicles): H (high protection) / M (medium protection) / L (low protection).
Default set to high protection (H).
When connecting the device to the application via Bluetooth:
Pressing once, when the "AP" message appears on the device control panel, will enable its connection
with the application on the external device.
Temperature reduction
button
Temperature increase
button
Settings button
Changing the temperature scale on the control panel
(°C/°F)
With the device turned off, press and hold the button until the message E1 appears Then press the button several times
until the content of the message changes to E5. Use the button or to switch between the ° C and ° F temperature scales. Turn
off the device using the button to save the setting.
Operating the device from the application level (Android / iOS)
The application
Yeticool
can be downloaded from the GooglePlay store (for Android devices) or AppStore (for iOS devices). For
the proper operation of the application, it is required to turn on the Bluetooth function and the location function on the external
device.
To connect to the application, launch it on an external device (smartphone / tablet), search for and select the fridge from the list of
available devices. The refrigeration appliance control panel will display "AP", which must be confirmed by pressing the button .
The device should be ready for receiving commands from the application.
