YewdaleKestrel
®
fitting instructions
Part no: 927
6
Fitting Instructions
YewdaleKestrel
®
Roller blinds (KR20 & KR20S Top & Face fix)
All Brackets
Discs should be horizontal and the centre of the gravity of the load should be
directly beneath the centre-line of the discs. Test the completed installation.
The downward force needed to part the brackets should never be more than
400N (40kg static load) at any point.
Warning
The magnetic element of the YewdaleKestrel
®
bracket is POWERFUL. Handle
with care. If attached to a flat steel surface it may be difficult to remove the
magnet. DO NOT PLACE NEAR SENSITIVE ELECTRONIC EQUIPMENT.
YewdaleKestrel
®
products are designed as standalone products only.
Care should be taken when assessing or arranging a room to ensure that
YewdaleKestrel
®
products cannot be misused in conjunction with any other
item, furniture or fixings in the room. It is the responsibility of the end user or
client to ensure the product is suitable for the environment it is being installed
in. YewdaleKestrel
®
products must be fitted by a qualified professional with
an up to date training certificate and in accordance with the manufacturer’s
instructions. Failure to do so could jeopardise the product’s effectiveness as
an anti-ligature system. All installations must be tested when complete to
ensure the downward force does not exceed the maximum nor is it breaking
under below normal force. It is highly recommended that sign off with proof of
testing is issued to the client after installation.
