YewdaleDefiant
®
programming instructions
Part no: 980001
6
Adding a new transmitter:
Delete single channel memory:
Press STOP on the transmitter
for 5 seconds.
Press STOP on the transmitter
for 5 seconds.
Motor will shunt once.
Motor will shunt once.
Press UP on the new
transmitter.
Press PROG for 1 second.
Motor will shunt once again.
The transmitter is stored.
Motor shunts once again. Single
channel has been deleted.
Delete all the memories:
Press STOP for 5 seconds.
(After deleting all codes, the motor will be restored to factory setting)
Press PROG for 7 seconds
within 10 seconds of
pressing STOP.
Motor will shunt once.
Method 1
Motor will shunt twice
within 7 seconds. The
memory has been cleared.
Motor will shunt once
within 1 second.
Programming Instructions
YewdaleDefiant
®
230v AC Tubular motor w/ Radio Receiver (980001)
