background image

YewdaleDefiant

®  

Manufacturing instructions  

Part no: 2004

6

1

.

 

Ensuring the head box/fascia profile is square within the saw, cut the head 

box to size. 

2

.

 

Ensuring the head box cover is square within the saw, cut the head box to 

size making sure there is no distortion.

 N.B It is critical that the profile is cut square to enable the cover to close.    

3

.

 

Cut the barrel, bottom bar, fabric, side channels and PVC insert to size.

4

.

 

File all aluminium cuts and cut a small V-shape in the top of the PVC tracker 

profile to assist in fabric location.

5

.

 

Weld a pocket at the bottom of the fabric to fit the fabric insert (see 

diagram on Page 4). Weld zips onto fabric both sides of the fabric to match 

the drop of the blind.

6

.

 

Attach the fabric to the barrel making sure the narrow end of the fabric is 

attached and central to the barrel.

7

.

 

Attach the bottom bar to the fabric using the fabric insert. Once complete 

insert the end caps.

8

.

 

Insert the transition plates into the head box and attach the end plates 

using 933010 screws.

9

.

 

Cut the chain to length and attach to control mechanism.

10

.

 

Making sure the control is on the correct side, insert the control mechanism/

pin end into the barrel and place the barrel and fabric into the head box. 

11

.

 

Using the punch provided, punch a hole in the head box cover to enable the 

chain to enter/exit the head box:

a) Place the 

template on the 

control side of head 

box cover and mark 

the hole for the 

chain guide using 

a pencil (template 

should be pushed 

firmly against the lip 

on the cover).

C40-60T Cassetted Blinds:

Use this 

hole on the 

template

Manufacturing Instructions

YewdaleDefiant

®

 cassetted blinds (C40-60T)

Summary of Contents for C40-60T









Reviews: