YewdaleDefiant
®
Manufacturing instructions
Part no: 2009
6
Manufacturing Instructions
YewdaleDefiant
®
cassetted blinds (C47-90)
11
.
Insert the motor into the barrel making sure the grooves are aligned with
the adaptors and then insert the pin end (918246) into the barrel.
12
.
Threading the cable through the 12mm hole, place barrel and fabric into the
head box by locating the pin end first into the transition plate.
13
.
To drill the holes for the safety screws at either end of the head box cover,
use the template provided. Mark the hole shown below with a pencil. Once
marked, remove the template and drill a 4mm hole and countersink.
14
.
Attach head box cover onto the head box, close and secure using two safety
screws (933010).
15
.
Lift head box onto test rig and ensure blind operates correctly.
16
.
To transport blind, it is recommended that the barrel with fabric is removed
from the head box and packaged separately.
Use this
hole on the
template
