Call:
+44 (0)1268 570900
Fax:
+44 (0)1268 732509
Email:
enquiries@yewdale.co.uk
Visit:
www.yewdale.co.uk
5
9
.
To attach the tear drop bottom bar, cut the 10mm plastic strip (962499) and
attach in line with the base of the fabric on the back, using the double sided
adhesive tape on the strip. Attach one staple at each end and one in the
middle of the fabric through the plastic strip using a heavy-duty stapler and
suitable staples, ensure staples are completely compressed.
10
.
Folding the fabric as shown below, insert this into the tear drop bottom
bar using a sliding process from either the left of the right-hand side of the
blind.
11
.
Secure the fabric in the bottom bar by pushing home the bottom bar end
caps (Part No 938312W/B/S)
12
.
Secure the fabric in the barrel by pushing home the Slipstream Control
Mechanism and pin end into the barrel
13
.
Lift the blind onto a test rig and inspect for any defects.
Back of
fabric
