YewdaleDefiant
®
manufacturing instructions
Part no: 1012
8
Manufacturing Instructions
YewdaleDefiant
®
roller blinds (R20, R20C, R20S, R20W)
R20S Spring control:
NB. The R20S is only available on the 32mm barrel (Part number 938021)
1
.
Ensuring the barrel is free from damage, cut to the desired blind width
minus 34mm. If a limit stop is to be used, deduct 36mm.
2
.
Ensuring the bottom bar (Part number 938311W/B/S) is free from damage,
cut this to the desired blind width minus 20mm.
3
.
Ensuring the back bar (Part number 938031W) is free from damage, cut this
to the desired blind width minus 4mm, and screw the back bar brackets
(Part number 941002W) onto the back bar with the part 933010W screws.
4
.
Selecting the required fabric, cut the width to blind width minus 20mm and
the drop to blind drop plus 250mm.
R20SBCS
Acorn pullcord accessory set
938311W/B/S
Tear Drop Bottom Bar
941001W
Braked Spring
Bracket Set
(Standard)
941001W
Braked Spring
Bracket Set
(Standard)
938021
Barrel 32mm
941006
Braked Spring
Control End
941003
Braked Spring (Short)
941004
Braked Spring (Medium)
941005
Braked Spring (Long)
941007
Braked Spring (Narrow)
938312W/B/S
Bottom Bar
End Cap
941010
Spring limit stop
962499
10mm Plastic Strip
with double sided tape
926325W
Back bar top fix bracket
941002W
Braced Spring
Bracket Set (Back Bar)
933010W
Back bar screw
926325W
Back bar top fix bracket
938031W
Aluminium back bar
OPTIONAL
