YewdaleDefiant
®
fitting instructions
Part no: 949
4
R42 Spring assisted sidewinder control:
N.B
.
This blind should be installed by a person competent in DIY. If in doubt
please consult a professional.
1
.
The standard plastic brackets are suitable for face or top-fixing.
2
.
Check that the blind fits correctly. The spring sidewinder mechanism will
be on the right-hand side, with the fabric rolling off the back of the barrel,
unless a reverse-roll was ordered.
3
.
Fix the spring-end bracket using appropriate screws/plugs.
4
.
Locate the blind into the spring sidewinder end bracket, and mark the
position of the pin-end bracket, allowing approximately 2mm free-play
between brackets and blind.
NB. To operate correctly, the blind MUST be fixed level.
Fitting Instructions
YewdaleDefiant
®
roller blinds(R42)
