9
2.
Enable the Radio module (refer to
6.1 GSM
);
3.
Input the PIN code if the Pin code is enabled for the SIM card (refer to
6.5
Pin
).
[Relevant Information]: Enable PIN code for your SIM card on a mobile phone.
The initial PIN code provided by your service provider and is modifiable. Note if
the PIN code is input for successes three times, the SIM card will be locked and a
PUK code is required to unlock. Do remember your PIN code.
You may visit and download from the Internet after connecting the device to GPRS
network. Take the following steps to set up GPRS network connection:
1. Insert an SIM card supporting GPRS service;
2. Enable the radio function (refer to
6.1 GSM
);
3. Input the PIN code when the device is powered on if it has been enabled (refer to
6.5 Pin
);
4. Enter the GPRS Setting interface (refer to
Chapter
Ⅶ
GPRS
) and tap
“Connect”.
