2
A. Assembly
1. Check the list
Before the assembly of the car model, please check the list of items to see if
there are any missing parts, flawed pieces, and make sure the parts are
complete before assembly.
2. Test
Please test whether the motor is running normally before assembling the
chassis.
➢
The motor is a DC deceleration motor with an encoder. It can be tested
whether the motor can work normally by directly electrifying the red and
black lines of the motor.
➢
The encoder part should be connected to the Single-Chip Microcomputer
for testing.
3. Specifications of screws
For beginners, it is easy to use the wrong size screw; so before the assembly, be
sure to be familiar with the following contents, which will enable you to install
the steering gear car faster.
➢
M3 * 10mm screws to fix chassis parts
➢
M3 * 6mm flat-head screws to fix the
motor
➢
M4 * 6mm screws to fix motor bracket
