www.yictechnologies.com
Installation and Hardware Setup
1. Install latest version of Keysight IO
Click
here
to open the website to download the latest version. On the website click on
the Download button and follow the steps.
2. Install the EMViewer Primum application
Install the EMScanner software by clicking on the Setup application icon. The
application must always be installed on the C: drive.
The EMViewer software can be purchased at
www.yictechnologies.com
3. Verify that your camera works correctly.
Windows has a built-in camera application you can use for this. Type Camera in the
Windows search box.
4. Connect PC, spectrum analyser and probe as per the diagram below.
If you are using Ethernet between the PC and the spectrum analyser, use a
crossover Ethernet cable. If the spectrum analyser has multiple trigger ports, always
connect to Trigger 1 IN.
Connection Diagram
