background image

 
 
 
 
 
 
 
 
 
 

Warranty 

 
The Yield Technology Co., Ltd. (YTC) warrants to the purchaser that this product, under 
normal use and conditions, will be free from defects in materials and workmanship for a 
period of 12 months from the date of original purchase. If a product proves defective 
during this warranty period, YTC, at its option, either will repair the defective product 
without charge for parts and labor, or will provide an exchange for the defective product. 
 
In order to obtain service under this warranty, the purchaser must notify YTC of the defect 
before the expiration of the warranty period and make suitable arrangements for the 
performance of service. The purchaser shall be responsible for appropriate packaging and 
shipping with a carrier designated by YTC, with shipping charges paid by recipient (YTC). 
 
This warranty shall not apply to any defect, failure or damage caused by improper use or 
improper or inadequate maintenance and care, alterations, mishandling or accidents. YTC 
shall not be obligated to furnish service under this warranty to costs incurred for 
installation, to correction of antenna problems, removal or reinstallation or to damage to 
video tapes, discs, speakers, accessories or vehicle electrical system.  
 
The extend of YTC’s liability under this warranty is limited to the repair or replacement 
provided above and, in no event, shall the company’s liability exceed the purchase price 
paid for this product. 
 
THIS WARRANTY IS GIVEN BY YTC IN LIEU OF ANY OTHER WARRANTIES, 
EXPRESS OR IMPLIED. YTC AND ITS VENDORS DISCLAIM ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE. YTC’S RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE 
PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE 
PURCHASER FOR BREACH OF THIS WARRANTY. YTC AND ITS VENDORS 
WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER YTC OR THE 
VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. 

 

Thank you for purchasing the 
SuperGuard GPS/ GPRS Car Security 
and Tracking device. Please read all 
instructions carefully before 
operation, to ensure your complete 
understanding and to obtain the best 
possible performance from the unit. 

Table of Contents

 

 

 

1. 

Parts & Accessories      

 

 

page   4 

 
2. 

SuperGuard Vehicle Unit - Features 

page   6 

 
3. 

Preparations     page 

 

 
4. 

Installation 

     page 

 

 
5. 

Vehicle Unit – LED Indicators 

 

page  16 

 
6. 

Getting 

Started 

    page 

 

17 

 
7.  

Activate/ Disable Vehicle Security   

page  18 

 
8. 

Car Alarm/ Anti-Theft Features 

 

page  21 

 
9. 

Emergency 

Alarms    page 

 

24 

 
10. 

Monitoring 

Activities 

   page 

 

26 

 
11. 

Locating 

and 

Tracking 

   page 

 

28 

 
12.  Phone Call Operation   

 

 

page  30 

 
13.  Retrieving Device IMEA Number   

page  30 

 
14.  Technical Specifications 

 

 

page  31 

 
 
 

Summary of Contents for SG-VT02 QB

















Reviews: