NR130 5G Router User Manual
www.yifanwireless.com
42
Copyright @ Yifan 2021
from the Ping or detection of other Internet users. so that make More difficult to break into
your network. The default state of this feature is enabled ,choose to disable allow
anonymous Internet requests.
Filter IDENT (Port 113):
Enable this feature can prevent port 113 from being scaned from
outside. Click the check box to enable the function otherwise disabled.
Block WAN SNMP Access:
This feature prevents the SNMP connection requests from
the WAN. After Complete the changes, click the
Save Settings:
Button to save your changes. Click the
Cancel Changes:
Button to cancel unsaved changes.
Impede WAN DoS/Bruteforce
Limit ssh Access:
This feature limits the access request from the WAN by ssh, and per
minute up to accept two connection requests on the same IP. Any new access request will
be automatically dropped.
Limit Telnet Access:
This feature limits the access request from the WAN by Telnet, and
per minute up to accept two connection requests on the same IP. Any new access
request will be automatically dropped.
Limit PPTP Server Access:
When build a PPTP Server in the Router, this feature limits
the access request from the WAN by ssh, and per minute up to accept two connection
requests on the same IP. Any new access request will be automatically dropped.
Limit L2TP Server Access:
When build a L2TP Server in the Router, this feature limits
the access request from the WAN by ssh, and per minute up to accept two connection
requests on the same IP. Any new access request will be automatically dropped.
Log Management
The Router can keep logs of all incoming or outgoing traffic for your Internet connection.
Log:
To keep activity logs, select Enable. To stop logging, select Disable. When select
enable, the following page will appear.
