4. Front Cover Installation
Line up the notches on the front cover with the corresponding openings on the
front part of the vehicle. Push the notches into these openings. (The installation
of Front Cover is finished.)
5. Steering wheel installation
Remove the pin and cap nut from the steering wheel, and then connect the
steering wheel’s plug with dashboard’s plug. Then put the steering wheel hole
into the steering shaft’s hole, (Attention: the steering wheel outlet hole must be
in the same direction with the dashboard’s hole, otherwise the cable will be
damaged.).
6. Side mirror installation.
Fasten the bottom of the mirror into the corresponding opening
(Installation finished)
