- 15 -
Insert the oil gauge into the lubricating oil (cannot be rotated) and take out the view.
2. Add the qualified lubricating oil as appropriate, add the highest scale (on-line), do not add
more.
3. Screw into the oil ruler to check for oil leakage.
Note: the engine running time oil is insufficient, can cause damage to the machine;Excessive oil
can cause engine heating and fuel consumption.
Replace lubricating oil with oil filter and oil filter cleaning
Oil is used when the engine is still hot.
1. Screw down the oil ruler①.
2. Empty the oil container under the engine, And unscrew the Oil cap
bolt④ under the engine.
3. Start the ignition switch button to completely empty the residual
oil.
4. Remove the oil drain cover bolt and pour into the cleaning solvent.
5. Install the oil drain cover bolts and ensure that the seals are well
sealed.
6, injection about 1 liter recommendation grade engine oil, with oil scale, starting the engine, idle
quick turn off for a few more minutes, stay a few minutes later, check the oil, if necessary, to add
lubricating oil or blow off lubricating oil.
Note: areas with serious dust should increase the number of oil changes more than normal.
Spark plug selection and replacement
Compliant spark plugs: C9EH.
1. Remove the spark plug cap and remove the spark plug
with the special socket wrench in the tool bag.Use a wire
brush to remove carbon and dirt from spark plugs.
2. Check whether the spark plug electrode has loss, and
whether there is ablation on the side electrode.If the spark
plug loss or the insulator has a crack or fall off, the spark plug
should be replaced.
3. Check the electrode gap with the thickness gauge and
Spark plug gap
