4
● Place on a flat surface.
● Ensure all latches are locked.
● Ensure the waste holding tank is assembled correctly and the cap
is screwed on correctly.
● Weight bearing limit is no more than 200 kg.
● Do not lean on the seat cover during operation.
● Ensure water supply pressure is no more than 0.4Mpa.
● Do not use water with a temperature higher than 40 degrees.
1. Fill the tank with freshwater.
2. Open the slide valve.
3. Open the seat cover.
4. Pull the piston flush pump first and press it to flush.
5. Close the slide valve.
Caution:
Operation Instruction:
Summary of Contents for BFTLPT-1007
Page 3: ...1 BFTLPT 1007 QDCH V1...
