ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
5
6
USING CAM LOCK AND QUICKFIT
PRE-FIX DRAWER RUNNER INSTRUCTIONS
Tighten quickfit until shouIder is flush with panel.Do not overtighten or undertighten.
Pull inner and outer drawer runners apart before fixing them to panels.
Slide drawer runners apart until the drawer lock can be seen, as shown.
Press and hold the drawer runner lock and then continue to slide drawer runners apart, as shown.
Your inner and outer drawer runners are ready to be fixed to panels.
When installing the outer guide rail, please
use the guide rail notch to assemble towards the
inner direction of the drawer. Please fix the screws
according to the marked position. If the installed
position is changed, adjust it side-to-side at the
marked position.
When installing the inner guide rail, please
use the guide rail notch to assemble towards the
inner direction of the drawer. Please fix the screws
according to the marked position. If the installed
position is changed, adjust it up and down at the
marked position.
When fitting cam lock,ensure starting position is correct before you insert connecting quickfit.
Quickfit head should be in the centre of the cam lock when the two panels are joined.
Cam lock should be inserted before quickfit.
Turn cam lock clockwise to tighten.
INNER RUNNER
INNER RUNNER
INNER RUNNER
INNER RUNNER
OUTER RUNNER
OUTER RUNNER
OUTER RUNNER
OUTER RUNNER
