4
● Place on a flat surface.
● Ensure all latches are locked.
● Ensure the waste holding tank is assembled correctly and the cap
is screwed on correctly.
● Weight bearing limit is no more than 200 kg.
● Do not lean on the seat cover during operation.
● Ensure water supply pressure is no more than 0.4Mpa.
● Do not use water with a temperature higher than 40 degrees.
step 1.The A & B should be aligned
and fastened to ensure the upper
and lower tank are firmly conneced.
step 2.Open the fresh water
cap ① and fill it with fresh
water then tighten the cap up.
Caution:
How to use
①
Summary of Contents for GDGMF-V1
Page 3: ...1 BFTLPT 1009 GDGMF V1...