ASSEMBLY INSTRUCTIONS
4
User Manual for Electronic Lock
I. Initial Power-up:
1.Upon the system's first power-up, the initial password is set to a personal code
of "1234" and an administrative code of "123456".
2. After a power outage, the password and records of door openings will still be
saved.
II. Door Opening Operation:
1.In standby mode, press the "#" key to enter the password verification state,
enter the correct password verification, the buzzer "beep" two sound, open
the door.
2. Verification failed. Buzzer beeps three times.
3. If you enter the incorrect password three times in a row, the screen will display
an alarm symbol, and the alarm will sound for one minute. Entering the correct
password at this time will disable the alarm and unlock the door.
4. If no key is pressed within 8 seconds during input, the system will return to
standby mode.
5. If no keyis pressed within 8 seconds during input, the system will return to
standby mode.
Tips:Press the setting key for 4-5 seconds. If you hear a beep, the initialization is
successful. The user password and management password are restored to their
initial state. The initial Settings are as follows: The administrator password is
123456. The password is 1234.
