ASSEMBLY INSTRUCTIONS
7
VII. Vibration alarm function:
1. Press the "*" key, hear "beep", turn on the vibration alarm function,
wake up the panel,
2. press the "*" key, hear "beep" twice, turn off the vibration alarm function.
Alarm triggered alarm 30S, enter the correct password can stop the alarm,
after opening the door, the vibration alarm function automatically closed.
3. Door opening error alarm
When six consecutive fingerprint errors or four consecutive password errors
are entered, a sharp alarm will sound inside the safe.
4. The alarm can last for up to 1 minute. In the above two cases, only enter the
correct.password or fingerprint to open the cabinet door can be lifted. In
the case od dualauthentication, the password and fingerprint must be
at the same time to be lifted.
Vlll. Power and voltage in dicator:
The voltage is below 4.8V, and the blue light flashes when the door is verified.
Battery voltage is lower than 3.8V, when the user operates, the user is prohibited
to operate, and the buzzer sounds "Didi, didi, didi" 6 to remind the customer that
the battery is low.
1.replace the batteries.
2. Operating voltage: 4.2~7.5V
3. Operating current: 320mA
4. Static current: 35uA (at 6.0V)
5. Operating temperature: 0-50 ℃
