ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
9
10
Turn on the power and check the operation of the fan:
Kindly remind that the appropriate speed settings of
warm or cool weather depend on many factors such as
the room size, ceiling height, and the number of fans.
The slide switch controls the direction of the blades:
forward (switch down) or reverse (switch up).
A. Warm weather-(Forward) A downward airflow creates a cooling
effect. This allows you to set your air conditioner on a higher
setting without affecting your comfort.
B. Cool weather-(Reverse) An upward airflow moves warm air off the
ceiling.This allows you to set heating unit on a lower setting
without affecting your comfort.
OPERATING YOUR FAN
(WINTER TIME)
(SUMMER TIME)
NOTE
:Wait for the fan to stop before reversing the direction of the blade rotation
!
LIGHT ON/OFF
Fan Speed
H-Highest speed
M-Medium speed
L-Lowest speed
1. Restore electricity to the outlet box by turning the electricity on at the main
fuse box.
2. Remove the battery cover from the remote control transmitter, install the
battery, and replace the cover.
Note: 1)
. Use a 12V battery to replace original one.
2)
. If not used for a long period of time, remove the battery to prevent
damage to the remote transmitter, and store the remote transmitter
away from excess heat or humidity.
3. Remote control’s functions are as follows, including controlling transmitter,
fan speed and light.
REMOTE CONTROL SETTING AND OPERATION
FAN
STOP
Timer
1H
-
Fan
anto
turn
off
after
1
hour
2H
-
Fan
auto
turn
off
after
2
hours
4H
-
Fan
auto
turn
off
after
4
hours
8H
-
Fan
auto
turn
off
after
8
hours
MED
1H
STOP
LOW
LIGHT
HI
ON/OFF
2H
4H
8H
