7
ASSEMBLY INSTRUCTIONS
WARNING
: To avoid possible electrical shock, be sure the electricity is turned off in the main fuse box before wiring.
Loosen the 2 screws on the bottom of mounting bracket
but do not remove them. Raise the canopy up and align the
keyholes on the bottom of the canopy with the 2 screws on
the bottom of mounting bracket.
Rotate the canopy until both screws from the mounting
bracket drop into the slot recesses. Tighten screws.
1. Connect the fan to the remote control. The fan’s 4P plug should insert into the the remote control’s 4P plug.
2. Connect the remote control to the house’s power line, then connect the remote control’s white wire to the
house’s white wire. Connect the remote control’s black wire to the house’s black wire, and connect all the
fans’ green ground wires to the house of ground wires. Secure wires.
3. Connect the fan motor to the lamp: connect the fan motor’s 1P white wire to the lamp’s 1P white wire. Connect
the fan motor’s 1P blue wire to the tool’s 1P blue wire.
MAKE THE ELECTRIC CONNECTIONS
INSTALLING THE CANOPY
Motor
green
FOR MOTOR black
O
to
t
he
F
A
N
M
O
T
O
R
to
t
he
F
A
N
L
IG
HT
receiver of
remote
control
4P
to
A
C
P
o
w
er
brown
ACIN
N
AC
IN
L
green
120
Vac
SUPPLY
AC
N
AC
L
blue
green
FOR MOTOR/LIGHT N white
FOR LIGHT L blue
4P
TO MOTOR black
O
TO MOTOR/LIGHT N white
TO LIGHT L blue
green
!
