8
ASSEMBLY INSTRUCTIONS
1.Remove 3 mounting screws from the light kit.
2.Find the Molex connector from the motor and the Molex connector from the light kit. Slide them together.
3.Install 3 screws to the motor’s junction box and light kit tightly.
4.Carefully install the glass shade into the main body and turn clockwise to lock.
WARNING
: Take care not to over tighten when installing the glass shade.
Installation is now finished. Turn on the power switch as Fig 7. Then the fan lights are on. Test and pair your fan
immediately using the remote control.
INSTALLING THE LIGHT KIT
!
1
2
3
4
