YMGI: Your Modern Green Idea
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
21
INSTALLATION SITE SELECTION
Outdoor Unit
Select a site that allows the following:
The unit should be installed level on a pad that can support twice the weight of the unit.
If the outdoor unit will be exposed to strong winds, it must be adequately secured.
Do not install the unit at a location where the distance exceeds the maximum pipe length indicated in the table.
The maximum length of the connection pipe is listed in the System Requirements section.
1. Install the outdoor unit at a location that is capable of withstanding twice the weight of the unit.
2. Install the outdoor unit where it is convenient to connect refrigerant lines to the indoor unit.
3. Install the outdoor unit where the condensate water can be drained unobstructed during the heating mode to a
safe location.
4. Do not locate the unit where the noise may be objectionable to neighbors.
5. Provide the space shown below, so that the air flow is not blocked and future service and maintenance can be
performed.
Outdoor Unit
Minimum Distances
in (mm)
A
40 (1000
B
20 (500)
C
20 (500)
D
78(1980)
E
20 (500)