ENG
5.
Steering Wheel Assembly
•
Insert the Steering Shaft (#6) through
the bonnet from underneath.
•
Insert on top the Plastic Washer (#7)
Steering Shaft Loop (#4) and 2pcs of
Plastic Washer (#7) as shown.
•
Then attach the Steering Wheel (#1)
and Thrust Washer (#15) and the
Dome Head Nut (#17).
•
Tighten the nut with Wrench
-A
(#20).
Steering Shaft
Plastic Washer
Steering Shaft Loop
Steering Wheel
Dome Head Nut
Wrench-A
Thrust Washer