ENG
WHEELS, LEG & HEIGHT ADJUSTMENT
1
2
fig 9.
Anti-slipper
1.
There are wheels located on the front of the frame legs for easy moving.
To access wheels, hold the crib rear long handrail and lift up. Simultaneously
push the crib
f
orward or backwards (fig 9). There is an anti-slipper at the
bottom of leg to stop the crib
moving.
1
2
fig 10.
2.
Press button down as illustrated and pull leg out to adjust the length (fig
10). It can be adjusted in 2 positions.
fig 11.
fig 12.
3
.
The crib can be adjusted to 6 different height positions. In order to adjust the
height, press the adjustment lever down and adjust the crib to the desired position
(fig 11). Repeat this operation on the opposite side. The base of the crib can be
inclined slightly by adjusting the two legs to different heights (fig 12).
WARNING!
The crib can be inclined with a maximum variance of 2 positions
between one leg and the other (e.g. the right leg in position 1 and the left leg in
position 3).
WARNING!
The head of the child should always be positioned on the highest side.
