![background image](http://html1.mh-extra.com/html/yoder-smokers/s-series/s-series_operation-manual_3421911034.webp)
34
7.
Reinstall the heat diffuser/drip plate. The heat diffuser plate attaches to the hook on the auger shield
and rests on the grease divider on the right hand side of the grill. Once installed, check to be certain that
the edges are approximately one-quarter inch below the grate rails at the hopper end and that the plate is
adjusted evenly from front to back. (The diffuser is angled toward the right side of the grill to channel grease
into the grease container.)
(FIG 44)
8.
Reinstall the cooking grates and second shelf.
9.
Remove, inspect and clean the grease bucket as needed. Reinstall the grease bucket under the right
side of the grill.
10.
Open the hopper lid and inspect for any foreign materials.
11.
After complete inspection, continue to the Startup Section on the next page.
FIG 44
Summary of Contents for S Series
