ENGLISH
30
PASTA ATTACHMENTS
Accessory installation
CAUTION:
Before commencing any of the activities described below, unplug the device.
1.
Set the device on a flat, stable surface. Make sure kitchen machine head is lowered and the bowl
is installed according to mixer accessory installation instructions.
2.
Remove the grinding chamber mount cover by pulling it upwards.
3.
Slide the auger into the grinding chamber until you feel it click into position.
4.
Put the chosen pasta attachment on the auger in such manner as to fit the round inset on the cutting
chamber to the groove on the attachment. Put on and tighten the locking nut.
5.
Slide the grinding chamber into its mount at a 45° angle to the right. Make sure it is inserted fully.
6.
Twist the grinding chamber counter-clockwise to a vertical position until you hear it click into place.
7.
Push the hopper tray onto the grinding chamber. Insert the main food pusher into the opening at the top
of the grinding chamber.
Pasta types
udon tagliatelle pappardelle rigatoni