Yoggie Management Console
Configuring Gatekeeper Card Pro Network Settings
User Guide
|
33
The proxy settings are configured.
Configuring Additional Settings
Gatekeeper Card Pro includes two additional settings for optimizing performance.
MTU
- If you use a PPPOE dialer to establish an internet connection, or if you have
trouble sending or receiving e-mail, browsing the internet, or receiving updates to
Gatekeeper Card Pro, you might need to adjust the MTU (Maximum Transmission
Unit) setting. This is because the Windows MTU setting might be configured to
less than the standard MTU, which is 1500. Gatekeeper Card Pro must be
configured to the same MTU as Windows.
Web Filtering RPC Mode
- Some firewalls restrict access to UDP port 9020, which is
used by Gatekeeper Card Pro’s Web Filtering engine. To overcome this problem,
Gatekeeper Card Pro can allow the Web Filtering engine to operate on the well-
known HTTP port 443, which is always open on the Firewall. This mode of
operation is called Remote Procedure Call (RPC) mode.
This feature might slow browsing a bit, so you should only enable it if
necessary.
To configure MTU and RPC settings:
1. Click
Settings
in the Navigation pane of the Management Console.
The main
Settings
page appears.
2. Click the
Network
tab.
The
Network Settings
page appears in the display area.
Summary of Contents for GATEKEEPER CARD PRO
Page 1: ...www yoggie com...