10
6. IP CAMERA SETUP
Before using the IP Camera, you need to first change the default IP Address
and setup the environment for future application. If you do not know the IP
address of the IP Camera; first connect the PC to the IP Camera and search
for it using the Discover software, change the IP address and finish the setup.
6.1 Connect to IP Camera
Three Methods for Connecting IP Camera:
1. Get a Dynamic IP from DHCP Server
Please refer to 6.2 On the LAN using Discoverer.
2. Static IP Connection
Please refer to 6.2 On the LAN using Discoverer.
3. PPPoE Connection
Please refer to 7.4 IP Settings (Setup IP via PPPoE).
NOTE : Before using PPPoE and DDNS connection method, one must first use the
Discoverer software to setup an IP Address.