13-2
IM 2558A-01JA
13.1 List of Commands
Queries all the settings of the communication status feature.
Queries the contents of the condition register.
Sets or queries the extended event enable register.
Queries the contents of the extended event register and clears the register. 13-9
Queries the error code and message of the last error that has occurred (top
Sets or queries the transition filter.
Sets or queries whether messages other than errors will be stored to the
Sets or queries whether message information will be attached to the
response to the STATus:ERRor? query.
Sweeps up or down or stops sweeping. Queries the sweep state.
Sets or queries the sweep time.
SYSTem Group
Queries all the system settings.
Sets or queries the beep sound on/off state.
Sets or queries the LO terminal’s ground on/off state.
Queries all the communication settings.
Queries all the GP-IB communication settings.
:SYSTem:COMMunicate:GPIB:ADDre
Sets or queries the GP-IB address.
Sets or queries the GP-IB command type.
Queries all the Ethernet communication settings.
:SYSTem:COMMunicate:ETHernet:DH
Sets or queries the Ethernet DHCP on/off state.
:SYSTem:COMMunicate:ETHernet:IP
Sets or queries the Ethernet IP address.
:SYSTem:COMMunicate:ETHernet:MA
Sets or queries the Ethernet subnet mask.
:SYSTem:COMMunicate:ETHernet:GA
Sets or queries the Ethernet default gateway.
:SYSTem:COMMunicate:ETHernet:MA
Sets or queries the Ethernet MAC address.
Restarts the 2558A when the specified time elapses.
Clears the standard event register, extended event register, and error queue. 13-13
Sets or queries the standard event enable register.
Queries and clears the standard event register.
Sets bit 0 (the OPC bit) of the standard event register to 1 upon the
completion of the specified overlap command.
Returns ASCII code 1 when the specified overlap command is completed.
Queries the installed options.
Sets or queries the service request enable register value.
Queries the Status Byte Register value.
Executes a self-test and queries the result.
Holds the execution of the subsequent command until the completion of the