19
IM 701430-51E
20.
Press the “Hex” or “Bin” soft key to select the data format. The data of the data
field is displayed using the selected format.
Note
•
If indefinite data is present, a mark is displayed in the ACK column.
•
The detailed display list can be output as-is to a file on an external storage medium in
ASCII format (.txt extension). See section 6, “Outputting the Analysis Results to a File.”
Performing Pattern Searches
21.
Press the “Data Search” soft key followed by the “Search Setup” soft key to
display a dialog box used to set the search conditions.
Turn the jog shuttle to select the item. Press the “SELECT” key to display a
menu used to set the item or change the selected item.
Setting the Type
22.
Turn the jog shuttle to move the cursor to “Type.”
23.
Press the “SELECT” key to select “Frame Pattern” or “Indefinite State.”
If you selected “Indefinite State,” proceed to step 38.
If you selected “Frame Pattern,” proceed to the next step.
Setting the Message Format
24.
Turn the jog shuttle to move the cursor to “Message Format.”
25.
Press the “SELECT” key to select “Std” or “Ext.” The Identifier display changes
to the selected format.
Setting the Pattern Format
26.
Turn the jog shuttle to move the cursor to “Pattern Format.”
27.
Press the “SELECT” key to select “Hex” or “Bin.” The “Identifier” and “Data
Field” displays change to the selected format.
Selecting the Field
28.
Turn the jog shuttle to select the field. Select the field from “Identifier,” “RTR,”
“Data Field,” “ACK,” and “Error” and turn it ON.
4. Analyzing and Searching
