23
IM 701430-51E
6.
Turn the jog shuttle to select the save destination. The built-in floppy disk and
external SCSI devices are displayed in brackets [ ]. The directory is displayed
using < >.
7.
Press the “SELECT” key to display the contents of the selected storage medium
or directory.
For details on setting the output destination, see page 11-15 in the
DL7100/
DL7200 User’s Manual IM701410-01E.
Setting the File Name
8.
Press the “File Name” soft key to display a menu used to set the file name.
9.
Turn the jog shuttle to move the cursor to “Auto Naming.”
10.
Press the “SELECT” key to select ON or OFF.
11.
Turn the jog shuttle to move the cursor to “File Name.”
12.
Press the “SELECT” key to display a keyboard screen. Enter the file name
using up to 8 characters. If Auto Naming was turned ON, the first five
characters are valid. For details on entering the file name, see section 4.1,
“Entering Values and Character Strings” in the
DL7100/DL7200 User’s Manual
IM701410-01E.
13.
Turn the jog shuttle to move the cursor to “Comment.”
14.
Press the “SELECT” key to display a keyboard screen. Enter the comment
using up to 25 characters.
Executing the Output
15.
Press the “Save Exec (CAN Bus)” soft key to start the output. At the same time,
the “Save Exec (CAN Bus)” soft key changes to an “Abort” soft key.
Pressing the “Abort” soft key to abort the file output. At the same time, the
“Abort” soft key changes to a “Save Exec (CAN Bus)” soft key.
6. Outputting the Analysis Results to a File
