YOKOGAWA DL7200 User Manual Download

Page: 30 / 44

IM 701430-51E

command

Function

page

:SEARch:CAN:SEARch:SETup:IDENtifier?

Query all Identifier setting values for CAN analysis results pattern

searches

:SEARch:CAN:SEARch:SETup:IDENtifier:HEXa

Enter the Identifier search pattern for CAN analysis results pattern

searches in hexadecimal

:SEARch:CAN:SEARch:SETup:IDENtifier:MODE

Enter or query the setting indicating whether Identifier is used (1) or not

used (0) in CAN analysis results pattern searches

:SEARch:CAN:SEARch:SETup:IDENtifier:PATTern

Enter the Identifier search pattern for CAN analysis results pattern

searches in binary

:SEARch:CAN:SEARch:SETup:MFORmat

Enter or query the message format for CAN analysis results pattern

searches

:SEARch:CAN:SEARch:SETup:PFORmat

Enter or query the setting format for CAN analysis results pattern

searches

:SEARch:CAN:SEARch:SETup:RTR

Enter or query the setting indicating whether CAN analysis results pattern 34

searches are performed by data frame (0) or by remote frame (1)

:SEARch:CAN:SEARch:SETup:TYPE

Enter or query the setting indicating whether to perform a CAN

analysis results pattern search or an indefinite data search.

File Group

:FILE:SAVE:CAN:ABORt

Abort output of the detailed analysis list to ASCII-formatted file

:FILE:SAVE:CAN:EXECute

Output the detailed analysis list to an ASCII-formatted file

CAN Trigger Group

:TRIGger:CAN?

Query all CAN trigger function settings

:TRIGger:CAN:BRATe

Enter or query bit rate in the CAN trigger conditions

:TRIGger:CAN:DATA?

Query all Data Field setting values in CAN trigger conditions

:TRIGger:CAN:DATA:CONDition

Enter or query the Data Field condition in CAN trigger conditions

:TRIGger:CAN:DATA:DLC

Enter or query settings for the Data Field’s number of data bytes (DLC)

in CAN trigger conditions

:TRIGger:CAN:DATA:HEXa<x>

Enter byte-by-byte hexadecimal settings for the Data Field pattern in

CAN trigger conditions

:TRIGger:CAN:DATA:MODE

Enter or query settings indicating whether trigger activates on the Data

Field in the CAN trigger conditions

:TRIGger:CAN:DATA:PATTern<x>

Enter or query Data Field pattern settings in binary in CAN trigger

conditions

:TRIGger:CAN:EFRame

Enter or query settings indicating whether trigger activates on the Error

Frame in the CAN trigger conditions

:TRIGger:CAN:IDENtifier?

Query all Identifier setting values in CAN trigger conditions

:TRIGger:CAN:IDENtifier:CONDition

Enter or query settings for Identifier conditions in CAN trigger conditions

:TRIGger:CAN:IDENtifier:ID<x>?

Query all Identifier ID<x> settings in CAN trigger conditions

:TRIGger:CAN:IDENtifier:ID<x>:HEXa

Enter hexadecimal settings for the pattern of the Identifier ID<x> in CAN

trigger conditions

:TRIGger:CAN:IDENtifier:ID<x>:MODE

Enter or query the setting indicating whether trigger activates (1) or does

not activate (0) on the Identifier ID<x> in CAN trigger conditions

:TRIGger:CAN:IDENtifier:ID<x>:PATTern

Enter or query settings in binary for the pattern of the Identifier ID<x> in CAN

trigger conditions

:TRIGger:CAN:IDENtifier:MODE

Enter or query settings indicating whether trigger activates (1) or does

not activate (0) on the Identifier Field in the CAN trigger conditions

:TRIGger:CAN:MFORmat

Enter or query the message format in the CAN trigger conditions

:TRIGger:CAN:PFORmat

Enter or query the setting format for the trigger pattern in the CAN trigger 39

conditions

:TRIGger:CAN:RTR

Enter or query settings indicating whether the trigger activates on a data 39

frame (0) or remote frame (1) in the CAN trigger conditions

9. Communications Commands

Summary of Contents for DL7200













































Search results

Summary of Contents for DL7200

Reviews:

Related manuals for DL7200

Brands by name

Popular brands

YOKOGAWA DL7200, User Manual

Search results

Summary of Contents for DL7200

Reviews:

Related manuals for DL7200

Brands by name

Popular brands