YOKOGAWA DOX10, User Manual

IM 12J05S01-01E

ii

Introduction

For the safe use of this equipment

(1) About This Manual

• This manual should be passed on to the end user.
• The contents of this manual are subject to change without prior notice.
• The contents of this manual shall not be reproduced or copied, in part or in whole,

without permission.

• This manual explains the functions contained in this product, but does not warrant

that they are suitable for the particular purpose of the user.

• Every effort has been made to ensure accuracy in the preparation of this manual.

However, when you realize mistaken expressions or omissions, please contact the

nearest Yokogawa Electric representative or sales office.

• This manual does not cover the special specifications. This manual may be left

unchanged on any change of specification, construction or parts when the change
does not affect the functions or performance of the product.

• If the product is not used in a manner specified in this manual, the safety of this

product may be impaired.

(2) Safety and Modification Precautions

• Follow the safety precautions in this manual when using the product to ensure

protection and safety of the human body, the product and the system containing the
product.

(3) The following safety symbols are used on the product as well as in this manual.

DANGER

This symbol indicates that an operator must follow the instructions laid out in this
manual in order to avoid the risks, for the human body, of injury, electric shock, or
fatalities. The manual describes what special care the operator must take to avoid such
risks.

WARNING

This symbol indicates that the operator must refer to the instructions in this manual in
order to prevent the instrument (hardware) or software from being damaged, or a system
failure from occurring.

CAUTION

This symbol gives information essential for understanding the operations and functions.

TIP

This symbol gives information that complements the current topic.

See Also 

This symbol identifies a source to be referred to.

This symbol indicates Protective Ground Terminal

This symbol indicates Function Ground Terminal (Do not use this terminal as
the protective ground terminal).

This symbol indicates Alternating current