10-31
IM DR231-01E
Basic Settings (SET-UP)
10
Printing Reports on a Recording Chart
You can print created reports on a recording chart. If you set the REPORT PRINT menu item to
on during the configuration of the report function, the DR recorder starts printing automatically at
the same time it finishes making a report. You can also print reports by pressing the FUNC key,
opening the FUNC menu and then selecting the REP RECALL START menu item. In that case,
take note of the following:
• You can print the latest report only, irrespective of whether it is an hourly, daily or monthly
report. Neither daily nor monthly reports are printed if you print immediately after an hourly
report was created.
• Care must be taken when the REPORT PRINT menu item is set to automatic printing. If the
time for automatic printing arrives while printing is enabled from the FUNC menu, the DR
recorder will no longer print reports automatically.
• Even if you have configured the DR recorder so it prints a daily report in the enhanced format,
it prints the report in the standard format if it has been more than an hour since the report was
created.
• Even if you have configured the DR recorder so it prints a monthly report in the enhanced
format, it prints the report in the standard format if it has been more than a day since the report
was created.
To stop printing, press the FUNC key and select REP PRINT STOP from the FUNC menu. The
following are examples of how a daily report prints.
Standard format:
DAILY REPORT Jan.03.97 00:00 (START=Jan.01.97 00:00)
RCH CH/TAG MODE UNIT Jan.03 00:00 MIN/TOTAL MAX
R01 TAG-001CH_______ AVE V -1.0000 -2.0000 1.0000
R02 002 INST V 10.000
R03 003 SUM L 2.01 4.01
R04
R05
R06 TAG-A01CH_______ AVE unit06 20000.000 10000.000 30000.000
R07 A02 INST 200000.00
R08 A03 SUM 2.01 4.01
R09
R10
:
R60
Report channels
Channels included in printing
(Axx: computing channel)
Results of
computing
Minimum or
cumulative sum
Maximum
Starting time
Time to make report
Types of
computing
Units
Enhanced format:
DAILY REPORT Jan.03.97 00:00 (START=Jan.01.97 00:00)
RCH CH/TAG MODE UNIT Jan.03 00:00 MIN/TOTAL MAX Jan.02 01:00 Jan.02 02:00... Jan.03 00:00
R01 TAG-001CH____ AVE V -1.0000 -2.0000 1.0000 -2.0000 -2.0000 -2.0000
R02 002 INST V 10.000 9.000 9.000 10.000
R03 003 SUM L 2.01 4.01 1.0 1.00 1.00
R04
R05
R06 TAG-A01CH____ AVE unit06 20000.000 10000.000 30000.000 10000.000 10000.000 10000.000
R07 A02 INST 200000.00 9999.99 9999.99 200000.00
R08 A03 SUM 2.01 4.01 1.0 1.00 1.00
R09
R10
:
R60
Report channels
Channels included in printing (Axx: computing channel)
Results of
computing
Minimum or
cumulative sum
Maximum
Starting time
Time to make report
Types of
computing Units
Enhanced-format section of report
(list of the result of computing at
respective preset times for daily
reports)
Note
• If any of the following conditions is true, you cannot print reports even when the preset time to make a
report arrives. In that case, the DR recorder prints reports when the current printing ends.
• Manual printing is in progress.
• List printing or setup list printing is in progress.
• Header printing is in progress.
• Logging printing is in progress.
• The DR recorder does not print reports either even if the preset time to make a report arrives while
printing is enabled from the FUNC menu.
10.12 Working with the Report Function
Summary of Contents for DR231
Page 12: ...10 IM DR231 01E...
