8-32
TI71M01D06-01EN 3rd Edition: 2012.12.01
Function Parameter Setting Window
The Function parameter setting window contains the main #parameters that need to be set up
when performing various motor operations. If it is necessary to change #parameters other
than those listed in this window, use the terminal function.
The setup items pertaining to motor operations are found in [Operation table] data and
[System register] settings in addition to the items that can be changed in this window. Set up
these items as necessary.
Machine setup parameters above #110 require a reset or power cycle before they take effect.
Select a motor operation.
Regist: Sets up the parameters in RAM
and EEPROM. The settings are
retained even if the power is OFF.
Writes a value into the [Data] edit box after selecting the parameter you
want to change.
TIP
CAUTION
