2-6
IM 04L57B01-01EN
9
With Device Manager, check that OKI USB CDC Serial port* (COMxx) is shown under
Ports (COM & LPT).
* Check that the name shown in step 4 and “COMxx)” are shown.
Hereafter, this COMxx will be referred to as “the COM port that the GX70SM communicates with.”
Operation complete
Note
• Power supply from USB is required to configure the GX70SM. Use a powered USB cable.
• Do not disconnect the USB cable or turn off the power when the Wireless Input Unit
Configurator is connected to the GX70SM. If you perform these acts while data is being written
to the GX70SM (during firmware updating or configuration), the configuration information may
become corrupted.
2.3 Connection and Startup
Summary of Contents for GX70SM
