1-2
IM 04L57B01-01EN
1.1.2
Wireless Input Unit Configurator
Wireless Input Unit Configurator is a software application for configuring and performing
maintenance on the GX70SM.
Input configuration, wireless configuration, input calibration, and firmware updating are
possible by connecting to the GX70SM through USB.
PC
USB cable
Wireless Input Unit Configurator
GX70SM
Logging data stored in the GX70SM can be retrieved and saved as a file in the PC.
When the GX/GP/GM fails to acquire GX70SM measurement data because the
communication between the GX70SM and GX/GP/GM is disconnected or because of some
other reason, a logging data file can be used to interpolate the data during which acquisition
failed.
Note: There are certain GX/GP/GM settings that need to be configured to combine data. See
section 2.7, “Saving Logging Data to a File and Combining Logging Data.”
For details on setting the type of data to record, see the following manuals.
GX/GP User’s Manual
1.12.1, “Setting the Type of Data to Record (Display or event data) and
Recording Conditions”
GM User’s Manual
2.13.1, “Setting the Type of Data to Record (Display or event data) and
Recording Conditions”
Logging data
Logging data file
(.WLD)
PC
Recording data
(Event data)
Combining with measured data
Saving logging data to files
0010
1100
1010
Logging data
GX/GP/GM
+
Logging data file
Recording data file
(S)
File combining
Combined data file
(.WLC)
GX70SM
1.1 Overview
Summary of Contents for GX70SM
