2-30
IM 04L57B01-01EN
2.7.2
Combine Data Files
You can insert a logging data file (WLD file) into a GX/GP/GM event data file (GEV or GSE
file) and save it as a combined data file (WLC file).
Features of Data Combine
As described in section 1.2.9, “Data Dropout Detection (GX/GP/GM)” on page 1-7,
GX70SM data loss period* may occur in the GX/GP/GM depending on the wireless
communication status while the GX70SM is acquiring data.
The data combine function can be used to insert GX70SM logging data into a GX/GP/GM
data file that has a data dropout period so that the GX70SM measurement data during that
period can be viewed.
The combined data is saved as a new combined data file (WLC file) in the PC and can be
viewed using S Universal Viewer.
* This indicates the period from when the alarm “D: Comm lose due to time out” is set to on until it
is set to off on the GX/GP/GM. This period is hereafter referred to as the data loss period.
Explanation of Data Combine
The data combine function combines data using the following data file information.
• Determination of the GX/GP/GM data loss period
The data loss period is determined according to the alarm occurrence status as
described in section 1.2.9, “Data Dropout Detection (GX/GP/GM)” on page 1-7.
• Determination of the GX/GP/GM Data Time at Which Logging Data Will Be Combined
For the data loss period, the data serial number recorded in the GX/GP/GM wireless
input unit “Higher/Lower data serial” and the data serial number in the logging data are
compared to determine the GX/GP/GM data time to be combined.
2.7 Saving Logging Data to a File and Combining Logging Data
Summary of Contents for GX70SM
