background image

2

IM 04L51B11-01EN

To ensure correct use, please read this manual and the 

following manuals thoroughly before beginning operation.

For specifications, refer to General Specifications.

Paper Manuals

Manual Title

Manual No.

Model GX20W

Paperless Recorder Wireless Model User’s manual

IM 04L51B11-01EN

(This manual)

Model GX10/GX20/GP10/GP20

Paperless Recorder First Step Guide

IM 04L51B01-02EN

Precaution on the use of S

(Only delivered with each module or GX60)

IM 04L51B01-91EN

Online Manuals (included on the supplied DVD-

ROM)

Manual Title

Manual No.

YFGW710 Field Wireless Integrated Gateway 

IM 01W01F01-01EN

Electronic Manuals

You can download these manuals from the following web 

page:

www.smartdacplus.com/manual/en/

Manual Title

Manual No.

Model GX20W

Paperless Recorder Wireless Model  User’s manual

IM 04L51B11-01EN

Model GX10/GX20/GP10/GP20

Paperless Recorder First Step Guide

IM 04L51B01-02EN

Model GX10/GX20/GP10/GP20

Paperless Recorder User’s Manual

IM 04L51B01-01EN

Model GX10/GX20/GP10/GP20/GM10

Communication Command User’s Manual

IM 04L51B01-17EN

S STANDARD Universal Viewer 

User’s Manual

IM 04L61B01-01EN

S STANDARD Hardware Configurator 

User’s Manual

IM 04L61B01-02EN

Model GX10/GX20/GP10/GP20/GM10

Multi-batch Function (/BT) User’s Manual

IM 04L51B01-03EN

Model GX10/GX20/GP10/GP20/GM10

EtherNet/IP communication (/E1) User’s Manual

IM 04L51B01-18EN

Model GX10/GX20/GP10/GP20/GM10

WT communication (/E2) User’s Manual

IM 04L51B01-19EN

Model GX10/GX20/GP10/GP20/GM10

OPC-UA Server (/E3) User’s Manual

IM 04L51B01-20EN

Model GX10/GX20/GP10/GP20/GM10

SLMP Communication (/E4) User’s Manual

IM 04L51B01-21EN

Model GX10/GX20/GP10/GP20/GM10

LOG scale (/LG) User’s Manual

IM 04L51B01-06EN

DXA170 DAQStudio User’s Manual

IM 04L41B01-62EN

Precaution on the use of S

IM 04L51B01-91EN

Genaral Specifications

Title

General specifications No.

GX20W Paperless Recorder Wireless Model

GS 04L51B11-01EN

GX90XA/GX90XD/GX90YD/GX90WD/GX90XP/

GX90YA I/O modules

GS 04L53B01-01EN

*  The last two characters of the manual number and 

general specification number indicate the language in 

which the manual is written.

Notes on Attached Software

The accompanying software on the DVD-ROM is shared 

with YFGW710. For details on the software product and 

software licensing agreement, see the Please Read This 

First User’s Manual (IM 01W01F01-11EN) on the DVD-

ROM.

 

Notes

•  The contents of this manual are subject to change without 

prior notice as a result of continuing improvements to the 

instrument’s performance and functions.

•  Every effort has been made in the preparation of 

this manual to ensure the accuracy of its contents. 

However, should you have any questions or find any 

errors, please contact your nearest Yokogawa dealer.

•  Copying or reproducing all or any part of the contents 

of this manual without the permission of Yokogawa is 

strictly prohibited.

•  Please pass this manual to the end user. We also ask 

you to store this manual in a safe place.

Notice

NO RIGHTS OR LICENSES, EXPRESS OR IMPLIED, 

ARE GRANTED TO USE THIRD-PARTY DEVICES 

IN COMBINATION WITH THESE PRODUCTS IN A 

WIRELESS MESH NETWORK, OR TO USE THIRD-

PARTY SERVICES TO ACCESS, MONITOR OR 

CONTROL THESE PRODUCTS IN A WIRELESS 

MESH NEWORK VIA THE INTERNET OR ANOTHER 

EXTERNAL WIDE AREA NETWORK.

Patent Marking

Covered by one or more claims of patents: http://sipcollc.

com/patent-list/ and http://intusiq.com/patent-list/. 

Authorised Representative in the EEA

The Authorised Representative for this product in the EEA is:

Yokogawa Europe B.V.

Euroweg 2, 3825 HD Amersfoort,The Netherlands

Revisions

December 2014

1st Edition

June 2017

5th Edition

November 2015

2nd Edition

June 2018

6th Edition

May 2016

3rd Edition

July 2018

7th Edition

February 2017

4th Edition

GX20W Versions and Functions

Edition Product

Addition and Change

1

Version 2.02 -

2

Same above The explanation of EU Battery Directive has been corrected.

3

Version 3.02 Update to the Version 3.02

4

Same above Additions of Optional Code (Conformity to CE marking)

5

Same above Difference function from Version 4.01.

6

Same above Additions of “Proper Disposal of This Product”

7

Same above Difference function from Version 4.03.

Summary of Contents for SMARTDAC PLUS GX20W

























Reviews: