10-20
IM 703155-01E
Selecting the Copy Source
3.
In the Source area in the Copy File dialog box, turn the
rotary knob
to select
the file or directory to be copied. The name of the selected file or directory
appears in the entry box in the Source area.
4.
Press
SELECT
to confirm. The cursor moves to the entry box in the Source
area.
To cancel the operation, press
RESET
. When cancelled, the cursor moves to the file
list display area in the Source area.
5.
After confirming the selection in step 3 and 4, press
SELECT
again. The cursor
moves to the Destination area.
Selecting the Copy Destination
6.
In the Destination area in the Copy File dialog box, turn the
rotary knob
to
select the copy destination directory or file. The name of the selected directory
or file appears in the entry box in the Destination area.
7.
Press
SELECT
to confirm. The cursor moves to the entry box in the Destination
area.
To cancel the operation, press
RESET
. When cancelled, the cursor moves to the file
list display area in the Destination area.
8.
After confirming the selection in step 6 and 7, use
numeric keys & ENTER
to
enter the directory or file name.
9.
Press
SELECT
. The copy operation is executed.
Source area
Destination area
Selection display
Displays the selected directory name.
In the case of the top directory of the
internal hard disk, a slash (/) is
displayed. In the case of the CF card,
/compact is displayed. In the case of
the USB memory, /usbmem is
displayed.
Indicates the directory of the file shown. The display here does
not change even if you change the directory to be shown.
To move to a higher level directory, select here and
then press the SELECT key twice quickly.
If you select compact/ (or usbmem/) and press the SELECT key twice
quickly, the data on the CF card (or USB memory) is displayed.
File list display area
File list display area
Entry box
Displays the directory or file name
selected using the rotary knob. You
can also enter the file name.
10.7 Copying Files and Directories
