7-5
IM 703155-01E
Editing Sequences
7
• Selecting the Waveform Data
7.
Press the
Element
soft key. Possible choices are displayed.
8.
Use
rotary knob & SELECT
to select No Sig. Period or File.
• If you select No Sig. Period, proceed to step 9.
• If you select File, proceed to step 11.
9.
Press the
Length
soft key.
10.
Enter the data length using
numeric keys & ENTER
.
Proceed to step 15 on the next page.
11.
Press the
Load File
soft key. The Element File dialog box opens.
12.
Turn the
rotary knob
to select a waveform data file. The name of the selected
file appears in the entry box.
13.
Press
SELECT
to confirm. The cursor moves to the entry box.
To cancel the operation, press
RESET
. When cancelled, the cursor moves to the file
list display area.
14.
After confirming the selection in step 12 and 13, press
SELECT
again. The
Element box shows the file name of the selected waveform data. The Length
box shows the data length of the selected waveform data.
Indicates the directory of the file shown. The display here does not change even if
you change the directory to be shown.
To move to a higher level directory, select here and then press the SELECT
key twice quickly.
If you select compact/ and press the SELECT key twice
quickly, the data on the CF card is displayed.
List of files and directories in the directory
File list display area
Selection display
Displays the selected directory name.
In the case of the top directory of the
internal hard disk, a slash (/) is
displayed. In the case of the CF card,
/compact is displayed.
Entry box
Displays the directory or file name
selected using the rotary knob. You
can also enter the file name.
7.2 Sequence Editing and Loading Waveform Data to the Waveform Memory
