13-5
IM 703155-01E
Rear Panel Auxiliary Input/Output
13
13.3 10-MHz Reference Signal Input/Output
10-MHz Reference Signal Input
CAUTION
Only input signals that meet the specifications below. Otherwise, undesirable
signal such as excessive voltage may damage the VB8300.
The VB8300 generates waveforms by synchronizing to the internal or external clock
signal. The 10-MHz reference signal is the signal used as a reference to the internal
clock signal frequency. If the reference signal is set to external (see section 5.1), apply a
10-MHz reference signal.
10-MHz Reference Signal Input Terminal (10 MHz REF IN)
Specifications
Item
Specifications
Connector type
BNC
Input frequency
10 MHz
±
50 ppm
Input level
0 dBm to 10 dBm
Input impedance
Approx. 50
Ω
Input coupling
AC
Maximum input voltage
Not to exceed 3 Vrms or 6 Vpeak.
