14-2
IM 703155-01E
14.2 Messages and Corrective Actions
A message (in English) may appear during operation. This section describes the
meanings of the messages and their corrective actions. If the corrective action requires
servicing, contact your nearest YOKOGAWA dealer for repairs.
In addition to the error messages listed below, there are communication error messages.
They are described in the
Communication Interface User’s Manual (IM703155-17E)
.
OS Errors
The VB8300 employs Linux as its operating system. Message with code numbers 1 to
124 are generated by the Linux operating system. If any of these messages appear,
servicing is required.
System Errors
Code Message
Description and Corrective Action
Reference
Section
800
System failure. Maintenance service is required.
–
–
801
Program failure. Maintenance service is required.
The date and size of the program do not match.
–
802
System RAM failure. Maintenance service is required.
An error occurred in the main RAM verification check. –
803
Not found setting backup file. Start up default setting.
Will automatically start up using default settings.
3.4
804
Key controller failure. Maintenance service is required.
Cannot read data from the key controller.
–
809
FPGA failure. Maintenance service is required.
–
–
811
Fan stopped. Power off immediately. Maintenance
–
–
service is required.
819
Lack of memory.
–
–
820-
Socket error.
Servicing required.
–
824
826
Error log file open error.
Servicing required.
–
827
FPGA memory check error.
Servicing required.
–
828
Date time query error.
Servicing required.
–
829
Date time setting error.
Servicing required.
–
830
Network invalid parameter.
Set the parameters correctly.
11.1, 11.2,
11.4
831
Illegal hostname and domainname.
Set them correctly.
11.2
832
System file open error.
Servicing required.
–
833
Can not open smb.conf.
Servicing required.
–
834
Smb.conf not found.
Servicing required.
–
835
Illegal netbios name.
Set it correctly.
11.4
836
Illegal time zone.
Set it correctly.
3.6
837
Time zone error.
Servicing required.
–
838
The update server is not specified.
Specify the update server.
–
839
It could not move to the work directory for
Work directory error.
–
updating.
Servicing required.
841
It could not open the file list for updating.
Servicing required.
–
842
There is no command which is necessary for
Servicing required.
–
update.
843
It is transfer error of the update file.
Update again.
–
844
It is expansion error of the update program file.
An error occurred while expanding the file.
–
Servicing required.
845
The update file list could not be created.
Servicing required.
–
846
The update file list could not be updated.
Servicing required.
–
